![](https://starboats.eu/wp-content/uploads/2019/02/etech_logo_beztla_287-90.png)
E-TECH Outboard POD
In-water motor in a watertight aluminum casing. Equipped with the ruddershaft, tube, steering lever and outboard bracket. For mounting at the transom.
- Brushless, perm.magnet electric engine (BLDC). The motor works underwater
- The engine is fully maintenance free and has a heavy thrust bearing installed
- A standard shaft f 25mm ( 4 POD, 7 POD) or f 30mm (10 POD, 15 POD), 1:10 conic, is fitted, that makes the use of a standard propeller very easy
![](https://starboats.eu/wp-content/uploads/2022/04/E-tech-electric-drives-outboard-pod-motor-foto1.jpg)
Motor parameters
Motor | Voltage | kWatt* | RPM | Controller | Motor |
4 POD | 48 | 4,3 | 1350 | Air | Water |
7 POD | 48 | 7,5 | 1350 | Air | Water |
10 POD | 48 | 10,9 | 1470 | Air | Water |
15 POD | 72 | 16,6 | 2240 | Air | Water |
*kWatt measured on the shaft. Representative values only. values may vary depending on the motor.
Complete system inclusive:
- Underwater motor
- Appropriate motor controller
- Comprehensive display with battery monitor
- Throttle (side- or top mounting)
- Ignition key on the dashboard
- Data cable from controller to engine (standard 2 meter),
with non-mistakable plug - Data cables between controller and steering position (standard 5 meter),
with unmistakable plugs
- Main switch
- Main fuse
- User manual and installation schedule
Nb. Propeller to be ordered separately
- >87% Efficiency
![](https://starboats.eu/wp-content/uploads/2022/04/E-tech-electric-drives-outboard-pod-motor-foto1.jpg)
![](https://starboats.eu/wp-content/uploads/2021/01/pod-system-inclusive-2.jpg)
Motor schemes
Additional equipment
You need advise with motor selection?